It is time to start the deck project. You need to be very careful about how much money you spend on it. Price is one of the most important things to think about right away. If you want to install wood decking, you will need to think about how much money you will need.
In most cases, hardwood decking prices are based on how wide each board is and how good the wood used is. If you want to compare the cost of different widths, some manufacturers also give prices per lineal foot. This makes it easier for customers to compare prices.
The width of the boards is the most important thing that affects hardwood decking prices. Because wider boards need more raw materials and labor to make, they usually cost more than smaller ones. However, some grades, like those with a lot of resin or exotic wood-like pipes, may be exceptions. They can charge more per board no matter how wide it is.
Variations in price:
Different companies will give different quotes when you ask about hardwood deck prices. In addition, the price of the same company can even change from time to time.
Composite vs Wooden decking:
You will be shocked when you find out that hardwood-decking prices are less than composite decking. It does not matter how good the wood is if you spend less money on it than you would on a composite deck.
Timber board size:
Many manufacturers make decking boards in the standard sizes of 85×20 mm or 130x20mm, but this varies from one company to another. You can also choose from a lot of different board sizes. When the deck is going to be used for business or where many people walk on it, bigger boards are very important.
A hardwood deck board that is 19mm or 20mm thick is usually strong enough for home use. There is a direct relationship between the thickness and size of the wood deck boards.
Substructure material:
People usually use treated pine as a substructure for hardwood floors, but this is not always the case. It will cost a lot more to buy hardwood decking if you want to use it for fire.
Substructure materials:
Treated pine is usually used to make the substructure under the decking. However, a wood base is needed for fire reasons in some cases. People who want to build a deck with hardwood substructures will have to pay more for the decking as a whole.
Height of the deck:
For decking that gets wet, you’ll need at least 300 to 400 cm of ground clearance. So you’ll need a steel or wood frame under the deck to raise it to the right height. The more you have to raise the deck off the ground, the more money you’ll have to spend on materials.
Now that you know the main things that can affect hardwood decking prices for a decking project, you can argue properly if you think a contractor is charging too much.
